RC4WD Composite D44 Front Axle Housing
Regular price
$134.99
RC4WD D44 Plastic Complete Front Axle
Specifications:
- Durable Injection Molded Black Nylon
- CNC Machined Super Hardened Steel XVD Axles
- 45° Steering Angle
- Removable Diff Cover
- Double Locked Steering Arm Setup
- Steering Knuckles with 8 degrees of King Pin Angle
- Engineered and Manufactured by RC4WD
- 12mm Steel Wheel Hex
- 5mm Axle Output Shaft
- Weight: 6.75oz / 191g
- Gear Ratio: 38/13 = 2.9:1
Shown installed with Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep, Axial SCX10 Jeep Rubicon, D44 Link Set for SCX 10CMS (SCX10 Width) (Z-S1072), Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 and RC4WD Jeep JK Rampage Recovery Bumper to fit Axial SCX10 Chassis (Z-S0434) for example (Not Included)
Shown installed on Axial SCX10 Jeep Rubicon with D44 Link Set for SCX 10CMS (SCX10 Width) (Z-S1072), RC4WD 1/10 Warn 9.5cti Winch, King Kong Tow Shackle (Z-S0093), RC4WD ARB Stubby JK Front Bumper for Axial SCX10, Chassis Mounted Steering Servo Kit with Panhard Bar for Axial SCX10 and Rok Lox 1.9" Comp Tires for example (Not Included)
What's Included:
Required Parts:
- 1x RC4WD D44 Plastic Complete Front Axle
Required Parts:
- D44 Link Set for SCX10 CMS (SCX10 Width) (Z-S1072)
- RC4WD D44 Plastic Complete Rear Axle (Z-A0106)
Optional Parts:
- Differential Gear Set for D44 and Axial Axles (Z-G0079)
- Heavy Duty Bevel Gear Set 43T/13T (Z-G0072)
- Heavy Duty Bevel Gear Set 36T/14T (Z-G0080)
- D44 Steering Knuckles (Z-S0955)
Replacement Parts:
- D44 Plastic Front Axle Replacement Parts (Z-A0119)
- Brass Knuckle Bushings for D44 Axle (8) (Z-S1716)
- XVD Axle Shafts for D44 Narrow Front Axle (SCX10 Width) (Z-S0989)
- RC4WD 12mm Axle Wheel Hexes (Z-S0239)
- Heavy Duty Differential Locker (Z-S1682)
- RC4WD Assembly Combo Pack (Oil, Thread Lock, Grease) (Z-S1732)
Replacement Hardware:
- 2x M4 Lock Nuts (Z-S0620)
- 6x Metal Shield Bearing 5x11x4mm
- 4x Metal Shield Bearing 10x15x4mm
- 4x Steel Socket Head Cap Screw M1.6 X 6mm (Z-S1236)
- 1x Steel Button Head Cap Screws M3 x 12mm (Z-S0654)
- 1x Nylock Nuts M3 (Z-S0629)
- 1x M4 E-clip (Z-S0919)
- 2x Metal Shield Bearing 6x10x3mm
- 4x Button Head Self Tapping Screws M3 X 5mm (Black) (Z-S1689)
- 6x Button Head Self Tapping Screws M3 X 10mm (Black) (Z-S1578)
- 4x Socket Head Self Tapping Screws M2 X 6mm (Black) (Z-S1584)
- 1x Flat Head Self Tapping Screws M3 X 10mm (Black) (Z-S1568)
- 4x Button Head Self Tapping Screws M3 X 8mm (Black) (Z-S1576)
Notes:
- Fits Axial Jeep Wrangler Rubicon SCX10. But you will need Z-S1072 and Z-A0106.
- Some components may come preassembled. Our assembly team works hard to provide you the best product possible, but it is always a good idea to ensure all hardware is tight and add additional grease to the gears as needed.
- The XVD unit allows for a large amount of steering. In order to prevent premature failure, it's recommended that you set your radio's steering EPA to limit the steering from being maxed out.
